Change background image
LOVE quotion

Bắt đầu từ 4.53' thứ Hai ngày 17/10/2011


You are not connected. Please login or register

Xem chủ đề cũ hơn Xem chủ đề mới hơn Go down  Thông điệp [Trang 1 trong tổng số 1 trang]

DuyHung
DuyHung Xuất sắc

Cấp bậc: Xuất sắc

Giới tính : Nam

Bài viết : 1248

Danh vọng : 2258

Uy tín : 32

AIR-LAP1131AG-E-K9

Cisco Aironet 1130 AG Series (Access Point) 95815610


  • Manufacturer: Cisco
  • Device Type: Radio access point
  • Form Factor: External
  • Localisation: Europe
  • RAM: 32 MB


DESCRIPTION

The Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point is a fixed-configuration, dual-band access point. Built in to the access point are two radios each with diversity antennas that provide omni-directional coverage.

The Cisco Aironet 1130AG supports local power as well as Power over Ethernet (PoE), either by an IEEE 802.3af-compliant Power Sourcing Equipment (PSE) device, such as a switch, or by a device capable of providing 12.95W to a Powered Device (PD) and compliant with Cisco Inline Power. The Cisco Aironet 1130AG Series includes a console port for management.

PRODUCT DETAILS
Device TypeRadio access point
Form FactorExternal
LocalisationEurope
RAM32 MB
Flash Memory16 MB
Data Link ProtocolIEEE 802.11b, IEEE 802.11a, IEEE 802.11g
Power Over Ethernet (PoE) SupportedPoE
PowerAC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)19.1 cm x 3.3 cm x 19.1 cm
Weight0.7 kg
Manufacturer Warranty1 year warranty
Lưu ý: Khi chạy AP ở chế độ Lightweight nghĩa là AP đang chạy ios của LAP thì không phải config trên AP mà phải cấu hình Controler, bạn phải đảm bảo LAP của bạn phải joined được vào Controler.

Cisco Aironet 1130 AG Series (Access Point) Air-pw10
Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point AIR-PWR-B=

Cisco Aironet 1130 AG Series (Access Point) AIR-PWRINJ3
Cisco Aironet® Power Injector AIR-PWRINJ3=

Cisco Aironet 1130 AG Series (Access Point) Airwlc10
WLAN Controller AIR-WLC2106-K9 , WLAN Controller AIR-WLC2112-K9 , WLAN Controller AIR-WLC2112-K9 .
      
DuyHung
DuyHung Xuất sắc

Cấp bậc: Xuất sắc

Giới tính : Nam

Bài viết : 1248

Danh vọng : 2258

Uy tín : 32

Cisco Aironet 1130 AG Series (Access Point) Air-ap10 Cisco Aironet 1130 AG Series (Access Point) Air-ap11

Enable Radio Interfaces

To enable the radio interfaces, follow these instructions:

Step 1 Use your web-browser to access your access point.
Step 2 At the prompt, enter the administrator username and password. The default username is Cisco and the
default password is Cisco. The username and password are case sensitive.
Step 3 When the Summary Status page displays, click Network Interfaces > Radio0-802.11B or
Radio0-802.11G and the radio status page displays.
Step 4 Click Settings and the radio settings page displays.
Step 5 Click Enable in the Enable Radio field.
Step 6 Click Apply.
Step 7 Click Network Interfaces > Radio0-802.11A and the radio status page displays.
Step 8 Click Settings and the radio settings page displays.
Step 9 Click Enable in the Enable Radio field.
Step 10 Click Apply.
Step 11 Close your web-browser.

Tham khảo: http://www.cisco.com/en/US/docs/wireless/access_point/1130/installation/guide/1130hig_book.pdf,
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_21a_JA1/configuration/guide/scg12421aJA1.html

Cisco Aironet 1130 AG Series (Access Point) Kgrhqv10

Thông tin sản phẩm: http://www.cisco.com/c/en/us/products/wireless/aironet-1130-ag-series/index.html
Download Software:


  • Autonomous AP IOS Software Cisco Aironet 1130 AG Series (Access Point) S: WIRELESS LAN c1130-k9w7-tar.124-25d.JA2.tar (14/9/2012)
  • Autonomous To Lightweight Mode Upgrade Tool Cisco Aironet 1130 AG Series (Access Point) S: Cisco Aironet Upgrade Tool for Cisco IOS Software. Utility that upgrades IOS OS to LWAPP and retains current AP configuration. Requires Cisco Aironet Upgrade Image - CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe (24/4/2008)
  • IP Setup Utility (IPSU) Cisco Aironet 1130 AG Series (Access Point) S: Cisco Aironet IP setup utility used to configure IP addresses of all Aironet Access Points, Wireless Bridges and Workgroup Bridges. Utility is loaded onto a wired or wireless client adapter - IPSU1v101013.exe (28/10/2005)
  • Lightweight AP IOS Software Cisco Aironet 1130 AG Series (Access Point) S: WIRELESS LAN LWAPP - c1130-k9w8-tar.124-25e.JAO4.tar (7/3/2014); WIRELESS LAN LWAPP RECOVERY - c1130-rcvk9w8-tar.124-25e.JAO4.tar (7/3/2014)


Cisco Aironet 1130 AG Series (Access Point) 41D0LpmqK1L._SX425_
      
DuyHung
DuyHung Xuất sắc

Cấp bậc: Xuất sắc

Giới tính : Nam

Bài viết : 1248

Danh vọng : 2258

Uy tín : 32

When you connect a 1130AG, 1140, 1200, 1240, 1250 access point, or 1300 series access point/bridge with a default configuration to your LAN, the access point requests an IP address from your DHCP server and, if it does not receive an address, continues to send requests indefinitely.

When you connect an 1100 series access point with a default configuration to your LAN, the 1100 series access point makes several attempts to get an IP address from the DHCP server. If it does not receive an address, it assigns itself the IP address 10.0.0.1 for five minutes. During this five-minute window, you can browse to the default IP address and configure a static address. If after five minutes the access point is not reconfigured, it discards the 10.0.0.1 address and reverts to requesting an address from the DHCP server. If it does not receive an address, it sends requests indefinitely. If you miss the five-minute window for browsing to the access point at 10.0.0.1, you can power-cycle the access point to repeat the
process.

The 1300 series access point/bridge assumes a radio network role of a root access point. To configure it as a bridge, you must manually place it in install mode in order to align the antennas and establish a link. To establish the link you must have two access point/bridges configured in the install mode. In the install mode, one access point/bridge must be configured as a root bridge and the other a non-root bridge. To facilitate the configuration, an automatic option is available when the access point/bridge is in the install mode. After the wireless link is established and the bridge antennas are aligned, you take both access point/bridges out of install mode and place them on your LAN as root and non-root bridges.
      
      

Xem chủ đề cũ hơn Xem chủ đề mới hơn Về Đầu Trang  Thông điệp [Trang 1 trong tổng số 1 trang]

Quyền hạn của bạn

Bạn không có quyền trả lời bài viết
free counters



  • Đoàn Ngọc Khánh

    mobile phone 098 376 5575


    Đỗ Quang Thảo

    mobile phone 090 301 9666


    Nguyễn Văn Của

    mobile phone 090 372 1401


    IP address signature
    Free forum | © PunBB | Free forum support | Liên hệ | Báo cáo lạm dụng | Thảo luận mới nhất